Steel Shot

Availability : In Stock
₹ 65 - 85 /Kg
Key Specifications
Material Grade
Steel Shots
Gravity
3.6g/cm3-4.1g/cm3
Material
Steel
Brand
Shot Blaster
Country
India
Packaging Type
Bag
Steel shots size
0.1 mm - 3.0 mm
Other Information
S70 : 
0.180 mm
S110 : 
0.300 mm
S170 : 
0.425 mm
S230 : 
0.600 mm
S280 : 
0.710 mm
S330 : 
0.850 mm
S390 : 
1.000 mm
S460 : 
1.180 mm
S550 : 
1.400 mm
S660 : 
1.700 mm
S780 : 
2.000 mm
S930 : 
2.400 mm
Description

Steel Shots are basically a kind of abrasives that are majorly employed in penning and shot blasting. Most commonly steel shots in India are available in two different shapes that reported their application requirement. Steel shot are basically used as abrasive media in pass-through machines, shot peening machines, abrasive blasting machine, spinner hanger machines, and table blast machines. Most probably steel shots are a burgeoning need nowadays because it their low price.  Some other alternatives such as cut wire shots may also be used. Both of them provides a longer life cycle and also reduces replacement order which will ultimately reduce the cost and makes it pocket friendly. The workability is also enhanced by the use of steel shots because steel shots have much strength and uniformity inside them.

In situations where we need to remove ferrous contaminants from the surface then steel shots are the only superior options for quite better results. angular and circular profile of steel shot makes them more efficient over time as this helps them in lubricating passing through tumble machines.

Steel shots in steel shot blasting is majorly used in removing oxides and debris from the surface of another metal. Although still shots in steel shots blasting are less upraised or recognized as compared to sand blasting but still shot blasting has relevance in certain applications.

Steel shots in shot blasting are also a part of the same family progression as sand blasting machine. The major difference between shot blasting and sand blasting is that sand blasting uses sand grains at high compressed air pressure for its abrasion and shot blasting used spherical balls of steel referred to as steel shots with a centrifugal wheel for its abrasion.

Steel Shot Price

The steel shot price varies based on several factors such as the steel shot size, the quality, and the quantity. The steel shot price is low compared to others. Steel shot in India is one of the most convenient and safe abrasive media as compared to other media as per their applications. Steel shots in shot blasting do not produce unwanted dust and dirt particles which are commonly produced while the process of sand blasting.

Rather than steel shots in India the dust particles which are lunately the outcome of sand blasting cause a lot of respiratory diseases if inhaled and if the process of sand blasting is not under proper measures the dust particles will ultimately affect the environment at its verge this is a plus point or a better option about using steel shot in India.

With the help of steel shots in India the risk of this unwanted pollution is at its null enforcement as all steel shots size are much more cost-effective, we can use steel shots multiple times in a single cycle which will reduce without much harm to the environment, and this makes them eco-friendly too. These are some of the reasons why steel shots in India are in high demand.

Steel Shots Size

Steel Shots Steel Shots Size
S70  0.18 - 0.35
S110 0.30 - 0.50
S170 0.42 - 0.71
S230 0.59 - 0.84
S280 0.71 - 1.00
S330 0.84 - 1.19
S390 1.00 - 1.41
S460 1.19 - 1.68
S550 1.41 - 2.00
S780 2.00 - 2.80
S930 2.36 - 3.35

Steel Shots Manufacturer

on average every year approximately estimated quantity of steel shots is one million tons this depicts that we have a vast range of steel shots manufacturer in India. 

There is a vast expanse of steel shots manufacturers in India, who are providing implacable sets of steel shot in India. Shot Blaster has assured quality steel shot blast media which are internationally tested at a very low price. The steel shots price in India fluctuates but we provide our price at a very authentic standard. We are the largest manufacturers, exporters, and suppliers of steel shots in India. Although steel shots are available in a variety of shapes still most probably the angular or round shapes of steel shots have maximum production.

Steel Shots Features

The leading features of our steel shots in India are:

  • Steel Shots abrasive has Extremely hard, 
  • Steel shot media is Very durable and has a consistent working ability, and 
  • Steel shots have maximum abrasive strength.

Steel shots in India are most probably employed in shot peening where steel shots suppliers harden the surface of the product which is being blasted and by the consistent abrasion of the steel shots. The major requirement which is to be done to have maximum outcome is to provide maximum pressure with steel shots to get an enhanced result, which is taken as another corn of steel shots in India.

We also manufacture a wide range of products such as copper slag, glass beads, steel grits, high carbon cut wire shots, aluminum oxide, cut wire shots, white aluminum oxide, walnut shell abrasives, plastic media, silicon carbide, quartz sand grains, abrasive garnet, high carbon cut wire shots, large glass beads, low carbon cut wire shots, large glass beads and many more.

Properties of Steel Shot

  • The steel shot are made up high carbon steel shot composites which makes them more durable. This gives steel shots a suitable utility factor in India.

  • The steel shots in India are having a good amount of hardness and toughness quality because of their rigid composition and because of these reasons, steel shots are being imperviously used on hard surfaces.

  • The grain size of steel shot in India makes them more convenient to work with and also enhances their workability as this will be quite easy to handle and cope with that.

  • The angular and round profile of these steel shot increases their impact on the metal surface and this makes steel shots more convenient to move with.

  • The chemical composition of steel shots is C - 0.70 – 1.20 %, Mn – 0.60% - 1.20%, Si- 0.40 – 1.20 %, S <0.05 %, and P <0.05 %, and most probably this is the only compositions in almost all the steel shots in India.

  • The hardness of steel shot ranges from 40 – 50 HCR in the case of normal steel shots, 52 – 56 HCR in the case of special steel shots and sometimes this may be 56 – 60 HCR. This is the maximum extent to which the hardness of steel shots in India can really extend.

Steel Shots in India

We provide steel shots for sale in India at a very low price and with very fine quality. Our all products are internationally tested and have been prepared while looking up to all quality control measures.

We provide a vast range of products some of them are flame spray guns, arc spray guns, thermal spray gun, zinc spray gun sand blasting machines, shot blasting machines, blast room, abrasive blasting machines, and so on. The steel shot price in India depends on various parameters and quality control measures. The steel shot price in India fluctuates as per certain norms but we offer steel shots at a very low price with all the required quality control measures. Along with steel shot blast media our all products are manufactured under the supervision of our specialized team of engineers and professionals.

Show More Show Less
Related Blogs
Steel shots for fabrication
03 May, 2024

Steel shots for fabrication

Steel shots are one of the greatest solutions for manufacturing in terms of the quality of the finished product. Steel shots are used in manufacturing processes to shape, cut, and mould certain materials and objects. Steel shots are typically manufactured by welding, forging, and cutting the suitable workpieces to the required requirements. Steel shot production is a static technique that results in completed products having a raw texture and a semi-finished look even though they are ready to transport. Instead of making something functional from nothing, use steel shots for manufacture.

Read More
Steel shots for peening
03 May, 2024

Steel shots for peening

Steel shots for peening are one of the fittest to the frame products as per the regulations as well as the quality of results provided by it. The goal of steel shots for peening is to balance the weld puddle's stress concentration as it cools.

Read More
Steel shots for finishing
03 May, 2024

Steel shots for finishing

Steel shots for finishing are one of the most spectacular choices. Steel shot for finishing is more affordable than for surface treatment. Steel shots for finishing create smooth surfaces as well as textured surfaces for finishing. Steel shots provide multiple types of surface treatment over all the categories of workpieces. Steel shots for finishing in particular regions create more strength, durability, and toughness for all kinds of hard and harsh surfaces. The steel shot prices set by our company are more than affordable and budget-friendly. Our steel shot price truly reflects its true value amongst all the other abrasive media in the market.

Read More
Related Products
Steel Shot S280

Steel Shot S280

Price Range : ₹ 65 - 85 /Kg

Steel Shot S280 is the most extensively used abrasive media for cleaning, stripping, and enhancing a metal surface. S280 steel shot is widely used in the shot blasting machine and sand blasting industries.

Steel Shots S330

Steel Shots S330

Price Range : ₹ 65 - 85 /Kg

Steel Shot S330 is the most cost-effective and low-consumption metal abrasive media. As required, numerous sizes of stainless steel shots are available. More Life Span, till it is reduced to the tiniest of particles. Steel shots 330 Increase the blasted components' fatigue life.

Steel Shot S460

Steel Shot S460

Price Range : ₹ 65 - 85 /Kg

Steel Shot S460 is a metallic abrasive created by crushing steel wire into tiny, uniformly sized, and shaped spherical pellets. The S460 designation relates to the steel shot's hardness, which is assessed on the Rockwell scale.

© Steel Shots. All Rights Reserved.